1. With a heat exchanger of exchange the heat energy via the tank water for hot water using.
2. Working pressure 6 bar
3. Vacuum tube and heat pipe vacuum tube can be optional
4. High efficient, stable performance, long lifet time service, easy installation, no need maintenance
Detailed Product Description
Advantages:
1. Special high quality Insulated material to reduce the heat loss
2. Excellent workmanship to guarantee the decent appearance, change for your request
3. Long life span and easy operation
4. This type of solar water heater can work in high pressure
5. It uses the heat pipe which can deliver the heat rapidly
6. The vacuum tube will not break in the winter for there is no water in it, even in the coldest area
7. Each vacuum tube works individually, so the machine will still at work in the event of occasional vacuum tube break down
8. Hot water with pressure make you bathe more comfortable
1. Highly efficient absorber or high perfomance with daily average efficiency orer 50%
2. Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction
3. With standard pressure of 6 Bar, can be connected directly with city water.
4. No water inside the evacuated tubes; The solar water heater can still in service even with several tubes breakage
5. Highly efficient insulation with polyurethane foam
6. Simple structure., easy to assembly and install
7. Can be used all year round in the cold climate
Description
Heat Pipe Pressurized Solar Water Heater(Color steel outer tank or compelete SUS304stainless steel )
Material of out tank
0.31-0.4 mmSUS304-2BStainless Steel
Material of inner tank
Food grade 1.2mmSUS304-2BStainless Steel
Tank insulating layer
Imported polyurethane from Bayer Germany, 50mm thickness can conserve the heat for maximum 72 hours
Inlet and outlet hole
Male G 1/2, 3/4
Max pressure
0.05 Mpa
Solar collector tube
3.3 Borosilicate glass with CU/SS/AL coating
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤ 0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
ε h=0.04-0.06(80C± 5C)
Idle sunning property parameters
Y=220~260m2. C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2. C)
Bracket:
1.5mm zinc coated steel sheet or 1.25 mm Stainless steel SUS-304
welding:
Argon arc welding
fastening pieces:
Made of stainless steel screw
Structure of tank:
6 holes. Magnesium bar, T/P valve, , sensor hole, water inlet and outlet hole, electric heater.